Q: I have a 2015 Dakota with a sprayed in bedliner which is faded and stained. Will your truck bedliner renew kit restore the original gloss and make it look like new again? A: For best results, we would recommend …Continue reading →
Question: I recently purchased a 7′ x 12′ triton ATV trailer, deck replaced approximately one year ago with 3/4 treated plywood which is in good shape. My question is two fold in that: 1) I wish to coat the wood …Continue reading →
Question: I have a pond with waterfalls, and it is leaking due to cracked concrete in the base. There are also some areas around the rocks leaking. What can I do to seal or fill the cracks and keep water …Continue reading →
Question: I was wondering about camper sealing. I have a pop up that I ordered the dB ultra coating. I have a seam at the base of the roof that is fiberglass roof meeting Painted aluminum trim. The factory sealed …Continue reading →
Question: I recently gouged my from-the-dealer spray-in bedliner when I was carrying some small landscaping boulders – the bedliner is completely gone and the paint showing through in several areas. However, the areas are narrow ‘channels’ from pushing/pulling the boulders …Continue reading →
A typical truck bedliner is recommended to be about 63 mils thick on the horizontal, and about 45 mils on the sides. For a durable coating on something like your camper, we would usually recommend 30 mils, but you could …Continue reading →
While our standard Seal Tite products are primarily meant to waterproof and protect on concrete, metal, or other such surfaces, our Seal Tite Ultra has the flexibility and tensile strength to waterproof polypropylene and similar fabrics. In fact, we suggest …Continue reading →
We offer a wide variety of coatings which would be suitable for your current project and would be glad to make a few suggestions. Our standard and Ultra product line can be applied with basic spray (hopper spray gun), roller, …Continue reading →
For dealers or larger orders, discounts are generally available, but the retail cost outline is below: We usually recommend 63 mils average thickness. This is what a quality job from Line-X would apply. Many applicators (including the Line-X, Rhino, etc.) …Continue reading →
Our Seal Tite koi pond coatings can be applied by brush or roller as well as spray gun. For best results if applying by roller, you will need a roller with as thin a nap as possible, but not a …Continue reading →